Helios Support PVA - Natural - 2.85mm - 0.3 KG

$14.00 $35.00

SKU: 38-E-7-D-6872 Formfutura

Sold Out

FormFutura Helios Support PVA Dissolvable 3D Printer Filament Canada


Helios Support is a “high heat” water-soluble PVA material which is engineered as support material for dual extrusion 3D printing in combination with engineering materials which require to be printed at higher temperatures and/or in heated build chambers.

Helios support can be printed at nozzle temperatures up to 250° C without the risk of cross linking and nozzle clogging and adheres extremely well to styrene based materials such as ABS, ASA, TitanX, Crystal Flex, and ApolloX, but also to Python Flex and Volcano PLA.

Helios Support dissolves slightly slower in water than normal PVA, but the dissolving process can be accelerated when using warm and circulating water. 

Unique features

  • Can be printed at nozzle temperatures up to 250° C
    • No risk of cross linking and nozzle clogging
    • Improved filament flowing behaviour
  • Can be printed in heated build chambers up to 60° C
  • Excellent adherence to ABS, ASA, TitanX, ClearScent ABS, ApolloX, Crystal Flex, Python Flex and Volcano PLA
  • Excellent solubility in warm circulated water
  • Fully biodegradable when dissolved in water

    STORAGE: One large resealable bag with slider + an extra desiccant pack are included with every spool. The bag and extra desiccant are a great way to safely store your filament spool when not in use. It keeps your filament bone dry & free from any dust or dirt particles, so it's always ready for your next print.

     3d filament net weight NET WEIGHT: 0.3 KG (0.66 LB)

    3d printing temperature guideline Printing


    235°C - 255°C
    • Nozzle size: ≥ 0.15mm
    • Heat bed: ± 35 - 60° C
    • Layer height: ≥ 0.1mm
    • Print speed: Medium
    • Fan speed: 0-25%
    • Flow rate: ± 100%
    • Retraction: Yes ± 5mm
    • Experience level: Expert
    • Once Helios Support has been used or opened from its original vacuum sealed packaging for a while it is advised to dry the material before using again.

    General guidance for printing with PVA support materials:

    Printing with PVA in general isn’t plug and play and does require a fair amount of 3D printing expertise as there isn’t a generic one-size-fits all setting for dual extrusion printing with PVA materials. The optimal PVA settings can even vary between the same models of 3D printers.

    One of the most common challenges is to establish a good bond between the PVA support material and the primary building  material. Below parameters are of utmost importance to establish a good adherence.

    • Verify the extrusion distance between the printed object and the PVA support.
      • The default setting in most slicer software is often set at a distance of 0.1mm or 0.2mm, which works well for break-away support, but not for PVA support.
      • For PVA support materials the extrusion distance must be set to 0.0mm as both materials must really come into contact with each other.
    • The printing (nozzle) temperature is extremely important and it is advised to measure the actual temperature of the nozzle and to compare this temperature with the temperature set in the print settings.
      • If the actual temperature of the nozzle is for instance 10° C lower than the temperature in the print settings it might very well be that the layer of PVA support material is not flowing optimally into the layer of the primary building material. It is often seen that the actually nozzle temperature varies from the print temperature set in the slicing software.
    • Verify if the nozzles of your printer are properly leveled and have exactly the same height, so that there is no “height difference” when layering the PVA support material on top of the primary building material.
      • In order to verify this it is recommended to 3D print a 5cm x 1cm rod and to print every 1 to 2 layers with the left nozzle and the following 1 to 2 layers with the right nozzle and to repeat this process multiple times. If you notice a non-perfect layering then the nozzles aren’t properly leveled. This process can be done with PLA for instance