This is an advanced PLA formula filament from eSun.
This new formula is still 100% biodegradable just like normal PLA yet it produces a much stronger filament!
PLA+ advantages over regular PLA:
- Elongation At Break: 29% (compared to only about 5% in regular PLA)
- Izod Impact Strength: 7KJ/m2 (compared to only about 4.2KJ/m2 in regular PLA)
- Prints smoother & smoother printed objects
- Extremely low warp
- Higher layer adhesion
- No brittleness issues
STORAGE: One large resealable bag with slider + an extra desiccant pack are included with every spool. The bag and extra desiccant are a great way to safely store your filament spool when not in use. It keeps your filament bone dry & free from any dust or dirt particles, so it's always ready for your next print.
||NET WEIGHT: 1 KG (2.2 LB)
|190°C - 210°C
- Heated bed optional, If equipped, set to 60°C
- Sticks well to blue painters tape
Print speed: 30-90 mm/s
- Movement speed: 90-150 mm/s