Questions? 1-888-536-5551
Cart 0
Taulman Alloy 920GF Glass Fiber Nylon 3D Printing Filament Canada

Taulman 3D

Alloy 920 Nylon - GLASS Fiber - 1.75mm
Free Gift

$49.95

taulman3D Alloy 920GF
A High temperature Alloy 910 base with a medium % of Cut Glass Fiber

Taulman Alloy 920GF Glass Fiber Nylon 3D Printing Filament Canada

The automotive industry has not taken on a greater percentage of filament based 3D Printing due to the lack of a material that meets temperature and “cold flow” requirements. Creep/cold flow or the ability of a material to hold up to the constant temperature cycles of an automobile is a primary requirement. Today, while we see plastics bolted directly to our engines and other mechanical components under the hood, what we are looking at is a 30% Glass Filled Nylon 6,6. Nylon 6,6 has a medium tensile, but also has a heat deflection temperature of around 110C.

The 30% GF helps to reduce cold flow to an acceptable level. Without the GF, parts would become dimensionally unstable in a smaller number of thermal cycles.

Nylon 6,6 is an injection molding thermoplastic not an “extrusion grade material” as it would easily crack if extruded in a 1.75mm or 3mm line. With taulman3D Alloy 920GF, the automotive industry can move forward with a greater percentage of filament based printing using a material that meets both cold flow and temperature requirements.

In addition, as the base polymer is an Alloy 910 material, there is a significant increase in tensile strength. The percentage of Cut Glass Fiber is controlled such that elongation is still in the 8% range needed for high vibration components.

The quality of Alloy 920GF is tightly regulated in that the compounding is performed at the Chemical mfg shortly after the batch process. This insures a constant compound from start to end of a spool as well as from spool to spool over years of printing.

  • Tensile = 82MPa
  • Elongation = 6% - 8%
  • Izod Un-notched = 680J/m
  • HDT = 107C

    STORAGE: One large resealable bag with slider + an extra desiccant pack are included with every spool. The bag and extra desiccant are a great way to safely store your filament spool when not in use. It keeps your filament bone dry & free from any dust or dirt particles, so it's always ready for your next print.

     3d filament net weight NET WEIGHT: 0.45 KG (1 LB)

    3d printing temperature guideline Printing
    Temperature:

    Notes:

    255°C - 276°C
    • Print bed = 55-75°C

    Share this Product
    Free Gift



    More from this collection