Alloy 960 Nylon - Carbon Fiber - 1.75mm
taulman3D Alloy 960CF
A High temperature Alloy 910 base with a <10% of Cut Carbon Fiber
Alloy 960CF if a carbon fiber filled filament that is based on the extremely popular Alloy 910 Nylon. Designed for the automotive industry as well as those that need an extremely hard yet durable material.
Alloy 960CF was developed to support large to extremely large parts where shrinkage or warping would otherwise be an issue. With the increasing sophistication of Printers and slicing software, users are finding more requirements to print large enclosures, shrouds and structural components. These parts are usually thin but have large surface angles as well.
The 960CF Carbon fiber has the tendency to “visually mask” layer lines while maintaining strength. In applications where rather long parts are needed or parts that need to handle a “cantilever” type strength requirement, 960CF is an excellent solution.
The quality of Alloy 960CF is tightly regulated in that the compounding is performed at the Chemical mfg shortly after the batch process. This insures a constant compound from start to end of a spool as well as from spool to spool over years of printing.
- Tensile = 91MPa
- Elongation = 8% - 10%
- Izod Un-notched = 690J/m
- HDT = 111C
STORAGE: One large resealable bag with slider + an extra desiccant pack are included with every spool. The bag and extra desiccant are a great way to safely store your filament spool when not in use. It keeps your filament bone dry & free from any dust or dirt particles, so it's always ready for your next print.
|NET WEIGHT: 0.45 KG (1 LB)|
|255°C - 275°C||