AMIDEX™ PA6-GF30 Glass Fiber Reinforced Nylon - Black - 2.85mm


SKU: 13A4 3DTPA6GF30N2BK 3DXTech

Sold Out

3d filament net weight MATERIAL NET WEIGHT: 0.75KG
Custom sizes may be available, contact us for details.
3d print settings PRINT SETTINGS: SEE BELOW.
Print settings listed in the product description below.
Contact us to inquire about documentation availability.

AmideX™ 30% Glass Fiber Reinforced Nylon

Our 30% glass fiber reinforced Nylon 6 Copolymer (PA6) is nothing less than an industrial-grade beast!  Formulated to be exceptionally stiff and strong - without being brittle.  Polyamides (PA) are the work-horse of the plastics industry because of their excellent mechanical, chemical, and thermal resistance.  This is the same type of PA6 used in automotive under-hood applications because it resists fuels, lubricants, heat, and heavy mechanical loads.  AmideX™ PA6-GF30 is suitable for use on practically any open-source 3D printer with a heated bed.  

Glass fiber is very abrasive and we strongly recommend using Hardened Steel Nozzles when printing with glass fiber reinforced materials.

Product Attributes

  • Ideal for structural engineering-grade applications
  • Exceptionally stiff and strong - without being brittle
  • Excellent chemical resistance - suitable for automotive and industrial applications
  • High thermal properties - up to 150c in-use applications depending on the mechanical loads applied
  • Improved dimensional stability - glass fibers reduce shrinkage, lift, and warp
  • Very strong layer bonding

AmideX™ PA6-GF30 is 40% stiffer, 33% stronger, and more affordable compared to Xstrand™ GF30 PA6.

Chemical Resistance Chart

3DXTech AmideX™ 30% Glass Fiber Reinforced Nylon 3D Printing Filament Canada

3d printing temperature guideline Printing


260°C - 280°C
  • Extruder:  260-280°C
  • Bed Temp:  60 - 75°C
  • Bed Prep:  Hairspray on clean glass, perf board, PEI sheet.  We have had great results using a thick coat of Aquanet hair spray on clean glass.  We make sure the first layer is pressed into the bed for extra grip to reduce lifting.
  • Hardened Nozzle: 0.4mm or larger.  Glass fiber is very abrasive and will quickly wear out a brass nozzle.  We strongly recommend Hardened Steel Nozzles
  • Layer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with glass fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.
  • Support:  Our Aquatek water soluble support works great to create complex parts.