Questions? 1-888-536-5551
Cart 0
biofila PlaTec strong heat resistant PLA 3D printer filament


BioFila PLATEC - Natural - 1.75mm
Free Gift


BioFila PlaTec is biodegradable bio-polymer made by Two-Bears in Germany. PlaTec is a unique PLA based material with extraordinary strength and heat resistance features that make is a great alternative to ABS!

biofila platec strong pla 3d printer filament Canada

Features of PLATEC:

  • Heat resistant up to 120°C
  • Extremely stable = less Infill and/or Perimeter
  • Less Warping (<0.5%)
  • Food safe
  • No odor
  • Low print temperature (185-220C)
  • No heated bed required
  • Easily sanded, polished and painted
  • Less layer visibility
  • Dishwasher safe!
  • Biodegradable
  • Tensile stress of 44 N/mm2
  • Modulus of elasticity in tension of 2600 MPa
  • Tensile stress at break of 24 N/mm2
  • Tensile strain at break of 97%


 3d filament net weight NET WEIGHT: 0.6 KG (1.32 LB)

3d printing temperature guideline Printing


185°C - 210°C
  • Will stick to blue tape and most common surfaces.
  • Heated bed not necessary. If equipped, set up to 55°C.
  • For optimal mechanical strength of your part, the following is recommended:
    Temperature: 195°C
    Print speed: 30mm/s
    Layer thickness: 0.1mm
  • NOTE: The strength of the part will decrease if printed at speeds of over 30mm/s to 60m/s. Printing at 60mm/s will show a very minimal reduction in mechanical strength of the part. However, printing at up to 90mm/s will significantly reduce the mechanical strength of the printer part.

Share this Product
Free Gift

More from this collection