Carbon Fiber PET
With CA-PET you can reproduce objects and devices with superior characteristics in every printer. Best use in office and textile machines, mechanical parts like supports and other.
ADDITIONAL INFORMATION ABOUT CA-PET
In general filaments made with CA PET (pet carbon) can be processed on conventional 3D printer using FDM / FFF technology.
CA PET is a pet carbon fiber reinforced developed for 3D printing and to obtain best results we recommend pre drying the filaments at 120° for 4-6 h. Increase drying time for spools up 1 kg.
Don’t leave the filament idle inside the nozzle for more than 20 min. Otherwise reduce temp to under 210°, to stop the thermal control.
0.5mm nozzle is recommended due to carbon fibers.
Carbon fibers are abrasive, we suggest to use a hardened steel nozzle.
||NET WEIGHT: 0.75 KG (1.65 LB)
- PLATE TEMP: 95-110 C°
- PLATE MATERIAL: Glass with PVA glue stick, PEI, buildtak, Carbon sheet, Plastic film, Composite phenolic cotton
- PRINT SPEED: 60 mm/s