ColorFabb XT Copolyester - Clear - 1.75mm
colorFabb_XT filament is produced from Amphora™ 3D Polymer by Eastman Chemical Company.
In 2013 Eastman and Helian Polymers entered a joint development program in order to develop a new unique 3D Printing material for Desktop 3D Printing.
Many formulations of specialty polyesters have been tested for functionality, printability and safe printing.
All these efforts have lead to a unique formulation for 3D Printing that features excellent properties : High strength and very high toughness, Odor Neutral processing, High Tg / improved temp. resistance, Styrene free formulation, FDA food contact compliance, BPA (Bisphenol A ) free formulation.
Amphora 3D™ Polymer will allow the user to produce 3D printed functional products in a safe way.
We are proud that colorFabb_XT is the first filament in the market to be produced with Amphora™ 3D Polymer, and now is available in a variety of colors.
COLORFABB_XT is unlike PLA, it is absolutely neutral from color and completely transparent. So if your 3d print project requires some transparency then you should give COLORFABB_XT a try, it is as transparent as any filament can get.
Apart from its transparency COLORFABB_XT is also a super tough material. Just try and break the filament and you’ll know that this will make super strong parts which are temperature resistant to 70C!
Net Weight: 750g
40 - 70 mm/s
Print on a heated bed. If you’re using aluminum of glass as the build plate we advice using glue stick to make sure the first layer sticks well and keeps the part from warping. After printing, the build plate needs to cool down to about 20-30 C at which point you can remove the printed part.