Heat bed: ± 40 - 60° C
- Nozzle size: ≥ 0.25mm
- Layer height: ≥ 0.1mm
- Print speed: Low / Medium
- Fan speed: 0%
- Flow rate: ± 100%
- Retraction: No
- Printing surface: Glass + Adhesive / PET tape
- Experience level: Intermediate
- Enclosed printer needed: Preferred
- Heated Build Chamber: No
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
*) First layer : 100 - 150% of first layer thickness.
*) Arnitel® ID 2045 can be used with a range of nozzle temperature (210–250 °C / 410–482°F). Preferred temperature to print your object is 230°C / 446°F. To generate a homogeneous melt, the melt temperature should always be above 200°C / 392°F. Optimal mechanical properties will be achieved at melt temperature between (210–250 °C / 410–482°F).
*) Print speed: 20 - 50 mm/s (obeying the maximal throughput in cm3/s of the extruder)
*) Do only remove printed object from print bed when print bed has cooled down to ambient temperatures, as otherwise printed part can deform severely.