DSM Novamid 1070 High Crystalline PA6 Nylon Filament - Black - 1.75mm - 0.5 KG

$48.00 $56.00

SKU: 26-C-2-D-0347 DSM

Sold Out

Novamid® ID1070 is a unique polyamide 6 filament originally developed as a specialty product to meet the demand for high-service levels in industries such as automotive and electronics.

Novamid® ID 1070 is a very ductile, strong polymer suitable for harsh environments and high temperatures, up to 150°C, offering excellent layer-to-layer adhesion, strength and toughness compared to other 3D printing materials.

The bridging performance of Novamid® ID1070 performance is unique and the high crystallinity of the polymer allows designs with overhangs.

Possible applications

  • Automotive - Air intake parts, door handles, engine covers, radiator grills, etc.

  • Electronics tools and parts - Circuit breakers, connectors, tubes for wiring, cable protectors, etc.

  • Sports - Ski binders etc.

 3d filament net weight NET WEIGHT: 0.5 KG (1.1 LB)

3d printing temperature guideline Printing


245°C - 285°C
  • Heat bed: ± 100 - 120° C
  • Nozzle size: ≥ 0.4mm
  • Layer height: ≥ 0.1mm
  • Print speed: Medium / High
  • Fan speed: 0%
  • Flow rate: ± 100%
  • Retraction: Depends*
  • Printing surface: PEI / Adhesive
  • Experience level: Expert
  • Enclosed printer needed: Yes
  • Heated Build Chamber: Yes

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

*) First layer : 100 - 150% of first layer thickness.

*) Novamid® ID can be used with a range of nozzle temperature (250–285 °C / 446–545°F). Preferred temperature to print your object is 260°C / 500°F. To generate a homogeneous melt, the melt temperature should always be above 250°C / 446°F. Optimal mechanical properties will be achieved at melt temperature between (260–280°C / 500-536°F).

*)  Print speed: 50 - 100 mm/s (obeying the maximal throughput in cm3/s of the extruder). Print speed for "normal" nozzle size (0.4mm) and layer height (0.2mm), for other values print speed should be adjusted accordingly!

*)  The build plate temperature depends on the position of the object to print. A build plate temperature, at the position of printing, of 100ºC / 86ºF should be applicable.

*)  Do only remove printed object from print bed when print bed has cooled down to ambient temperatures, as otherwise printed part can deform severely.

*Retraction dependent on printer type and filament diameter