Questions? 1-888-536-5551
Cart 0
EasyFil™ PLA - Sapphire Grey - 2.85mm

Formfutura

EasyFil™ PLA - Sapphire Grey - 2.85mm
Free Gift

$39.95 $49.95

FormFutura EasyFil PLA and ABS 3D Filament Canada

EasyFil™ PLA is a high-end, easy to use 3D printer filament, which is modified with an impact modifier making the filament tougher & less brittle, slightly softer, less rigid, much longer preservable and easy to print at relatively low temperatures. The EasyFil™ PLA compound is even FDA food and drink contact approved!

Another great advantage of EasyFil™ PLA – compared to regular PLA – is EasyFil™’s low shrinkage factor, which makes EasyFil™ PLA nearly warp-free and therefore  EasyFil™ PLA will not deform after cooling. Due to its low tendency to warp EasyFil™ PLA can be printed without a heated print bed. If your printer is however equipped with a heated print bed we recommend to set your heat bed temperature to ± 35° to 60°C.

Main Features:

  • Tougher and less brittle compared to standard PLA
  • Will not deform after cooling
  • Easy to print at low temperature
  • Low warping
  • Biodegradable
  • Limited smell
  • FDA Compliant

Next to its “easy to use” features, our Formfutura EasyFil™ filament range has an excellent roundness and very tight diameter and roundness tolerances, which makes this filament a perfect match with all common desktop 3D printers. Printing with EasyFil™ PLA 3D printer filament will go very smoothly with basically all FFF/FDM technology based desktop 3D printers.

PLA (Poly-Lactic Acid in full) is a thermoplastic which is extruded from the starch of plants, such as corn, cassava, sugarcane, cereals, or sugar beet. By being derived from biological resources this type of thermoplastic can be biodegradable under the right conditions (such as an active compost heap, with enough presence of oxygen) and therefore has a much lesser environmental impact than thermoplastics derived from fossil fuels.

Our EasyFil™ PLA does not contain any hazardous, or chemical substances. In fact, all our EasyFil™ PLA filaments are RoHS certified and REACH compliant.

 3d filament net weight NET WEIGHT: 0.75 KG (1.65 LB)

3d printing temperature guideline Printing
Temperature:

Notes:

180°C - 210°C
  • Can be printed without a heated bed, but if your printer does have a heated print bed it is recommended to set your print bed temperature to approximately 35° to 60° C.
  • Will stick to most printing surfaces including blue tape.

Share this Product
Free Gift


More from this collection