{"product_id":"flashforge-creator-5-pro-4-toolhead-enclosed-multi-color-3d-printer","title":"Flashforge Creator 5 Pro – 4-Toolhead Enclosed Multi-Color 3D Printer","description":"\u003cp\u003e\u003cstrong\u003eIn stock in Canada and shipping from our Brampton, Ontario warehouse.\u003c\/strong\u003e Free Canada-wide shipping on orders over $100.\u003c\/p\u003e\n\n\u003cp\u003eThe Flashforge Creator 5 Pro is a fully enclosed, four-toolhead multi-color and multi-material 3D printer. Instead of purging through a single nozzle every time the colour changes, the Creator 5 Pro's FlashSwap™ system swaps between four independent toolheads, so multicolour prints finish up to 500% faster with near-zero purge waste. Add a 65°C actively heated chamber, HEPA 13 plus activated-carbon filtration and a 256 × 256 × 256 mm build volume, and you have a printer that handles everything from PLA to ABS, ASA, PA-CF and PPS-CF.\u003c\/p\u003e\n\n\u003ch3\u003eWhy the Creator 5 Pro\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 independent toolheads:\u003c\/strong\u003e true multi-colour and multi-material printing in a single job, with fully automatic toolhead offset calibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUp to 500% faster multi-colour printing:\u003c\/strong\u003e no purge tower, no poop chute, no waiting on filament swaps.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eZero purge waste:\u003c\/strong\u003e each toolhead keeps its own filament loaded, so material changes produce next to no waste.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-speed performance:\u003c\/strong\u003e 600 mm\/s max travel, 300 mm\/s max print speed, 30,000 mm\/s² acceleration and a 32 mm³\/s flow rate.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully enclosed, actively heated chamber:\u003c\/strong\u003e heats to 65°C to eliminate warping and cracking on ABS, ASA, PC and PA. A cooling mode draws in fresh air for PLA, PETG and TPU with the door closed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHEPA 13 + activated carbon filtration:\u003c\/strong\u003e medical-grade H13 HEPA and coconut carbon capture dust and VOCs from ABS, ASA and nylon.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSafe and quiet:\u003c\/strong\u003e the enclosure brings operating noise down from 65 dB to 55 dB, with front-door and top-cover detection.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFully automatic calibration and levelling:\u003c\/strong\u003e auto bed levelling, dynamic flow (PA) calibration and auto-compensation for cleaner surfaces.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Full HD camera:\u003c\/strong\u003e remote monitoring and multi-printer management over dual-band Wi-Fi.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHardened-steel 0.4 mm nozzles, 320°C hotends:\u003c\/strong\u003e ready for carbon- and glass-fibre filaments out of the box. 0.25 \/ 0.6 \/ 0.8 mm nozzles available.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCreator 5 vs. Creator 5 Pro\u003c\/h3\u003e\n\u003cp\u003eBoth share four toolheads, hardened-steel nozzles, auto levelling and the same 256 mm³ build volume. The Pro adds the full enclosure, active chamber heating to 65°C, HEPA 13 and carbon filtration, auxiliary cooling, door and top-cover detection, and support for a much wider range of engineering materials. Active chamber heating is built into the Pro, so a standard Creator 5 cannot be upgraded to it later.\u003c\/p\u003e\n\n\u003ch3\u003eCompatible filaments\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended:\u003c\/strong\u003e PLA, PETG, TPU (64D \/ 90A \/ 95A), PLA-CF, PETG-CF, Silk, PVA, BVOH, S-Multi, S-PAHT, ABS, ASA, HIPS, PA-CF, PET-CF, PAHT-CF, ASA-CF, ASA-GF, ABS-GF, PPA-CF, PPS-CF.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEnclosure-supported (heated chamber):\u003c\/strong\u003e ABS, ASA, HIPS, ABS-GF, PA-CF, ASA-CF, ASA-GF, S-Multi, S-PAHT, PET-CF, PAHT-CF, PPA-CF, PPS-CF.\u003c\/p\u003e\n\u003cp\u003ePair it with our \u003ca href=\"\/collections\/abs-filament\"\u003eABS\u003c\/a\u003e, \u003ca href=\"\/collections\/asa\"\u003eASA\u003c\/a\u003e and \u003ca href=\"\/collections\/pla-filament\"\u003ePLA\u003c\/a\u003e lines, all stocked in Canada.\u003c\/p\u003e\n\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eToolheads\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 independent toolheads (FlashSwap™)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild volume\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e256 × 256 × 256 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStructure\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFully enclosed rigid frame\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eChamber heating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eActive, up to 65°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAir filtration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHEPA 13 + activated carbon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax print speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e300 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax travel speed\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e600 mm\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax acceleration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e30,000 mm\/s²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax flow rate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e32 mm³\/s\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax extruder temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e320°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMax bed temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e120°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBuild plate\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTextured PEI flexible steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNozzle\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e0.4 mm hardened steel standard; 0.25 \/ 0.6 \/ 0.8 mm optional; quick-release\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eAuto levelling\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes, fully automatic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFlow calibration\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes, automatic PA calibration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFilament run-out detection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower-loss recovery\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCamera\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eBuilt-in Full HD, 1280 × 720 @ 30 fps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4-inch 800 × 480 colour touchscreen\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eConnectivity\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB, Wi-Fi (2.4 GHz \/ 5 GHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSlicer\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eOrca-Flashforge, OrcaSlicer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDoor detection\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eFront door and top cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePrinter size\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e441 × 411 × 460 mm (520 × 443 × 710 mm with filament holders and tubes)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e18 kg net \/ 22 kg gross\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100–120 V \/ 200–240 V AC, 50\/60 Hz, 1200 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eGood to know\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFilament is loaded manually into each of the four toolheads; there is no multi-spool feeder in the standard configuration.\u003c\/li\u003e\n\u003cli\u003eAllow at least 10 mm of clearance on the left and rear, 200 mm on the right and 500 mm at the front.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Flashforge","offers":[{"title":"Default Title","offer_id":46533749637205,"sku":"FLF-01-3003","price":1299.0,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0376\/9913\/files\/4_--234.png?v=1793027524","url":"https:\/\/filaments.ca\/products\/flashforge-creator-5-pro-4-toolhead-enclosed-multi-color-3d-printer","provider":"Filaments.ca","version":"1.0","type":"link"}