MATERIAL NET WEIGHT: 2.5kg
Custom sizes may be available, contact us for details.
PRINT SETTINGS: SEE BELOW.
Print settings listed in the product description below.
DATA SHEETS & COFC: AVAILABLE UPON REQUEST.
Contact us to inquire about documentation availability.
GreenTEC Pro Carbon was developed for industrial use. With 10% carbon fiber, it offers higher stiffness, good mechanical properties and increased temperature resistance.
Our Vision was to create an organic material that combines the best of two worlds - our biodegradable filament GreenTEC Pro, made from sustainable resources, and the strength of high-performance carbon fibers. Used for various applications in motorsports, aerospace or medical, carbon is in many cases the best solution. It’s lightweight, resistant to high temperatures and creates a much higher stiffness if added to polymer materials.
- High Durability
- Temperature Resistant up to 165°C (Vicat VST) (Temperature resistance at a minimum wall thickness of 4 mm.)
- UV Resistant like ASA
- REACH & Rohs
- Hardened steel nozzle and min. nozzle diameter of 0,5mm is recommended
GreenTEC PRO Carbon is reinforced with fibers and therefore offers exceptional mechanical properties.
The carbon fiber creates a very hard and stiff material, ideal for high pressure loads.
High temperature resistant
The fiber load improves the heat resistance (VICAT), but also the HDT value of the material under load.
Ease of printing
Carbon is very abrasive. Therefore we recommend a hardened nozzle. The carbon fiber stabilizes the material and therefore reduces the distortion and stabilizes the plastic snarl during bridging. It is very easy to print.
Small carbon fibers are at right angles to the printed surface, creating a very nice matte surface and masking layer defects. Therefore the print object looks high class.
The challenge was to generate a good layer adhesion under the highest possible carbon load. Through special biological additives, we have achieved this goal. We recommend a printing temperature of approx. 230-240 ° C. The material is printable from about 200 ° C but the layer adhesion suffers significantly. As a first step we recommend to print a "Heat tower" to find the ideal settings for your device.
The fiber load makes the material very durable and therefore the material withstand impacts very well.
|200°C - 240°C
Speed: 60-180 mm / s
Print Bed Temperature: 0-90 ° C
Hardened steel nozzle and min. nozzle diameter of 0,5mm is recommended
Store at room temperature (18-27°C / 65-80°F) in a dry place. Make sure it is out of direct heat and sunlight. When stored correctly, this material has a shelf life of 2 years.