HydroSupport - Easy Water Soluble Support - 2.85mm
SKU: 10B4 3DFHYDRO2SP
HydroSupport dissolves completely in water and is much easier to print with than PVA filament.
Because it dissolves in water, HydroSupport only needs to be soaked a few hours to easily work supports off by hand, or 12 – 24 hours to dissolve completely. The process can be sped up further by using warm water and agitation. For example, by using a heated ultrasonic tank.
HydroSupport is non-toxic, meaning it can be rinsed down the drain without harming the environment or wildlife.
HydroSupport has a high tensile strength and feels like PLA when printing is complete. Use it as a support material to print large overhangs, intricate inner geometry, and deep cavities.
NOTE: Because HydroSupport breaks down in water, it is sensitive to high levels of humidity in the air. For best results store unused HydroSupport filament in a sealed container with desiccant.
3D-Fuel 3D printer filament is manufactured to demanding performance specifications and has proven filament precision! 3D printer filament from 3D-Fuel is of excellent dimensional tolerances. We don’t just say our filament is precise, we show that our filament is precise... Every spool has the diameter and ovality measurements listed right on the box!
|NET WEIGHT: 0.5 KG (1.1 LB)|
|185°C - 215°C||