Workday PLA/APLA Ingeo 3D850 - Fire Engine Red - 2.85mm
SKU: 10B3 3DFWPLA2RD
Filaments.ca has always striven to be in the forefront of 3D printing materials in order to bring our customers the latest and most innovative 3D printer consumables from around the world. As such, we are proud to announce that we have officially teamed up with 3DomFuel, the North American and European manufacturer of 3D-Fuel filaments, to bring you this Advanced Workday PLA filament!
Workday PLA is the first 3D Filament ever made from plastic that was engineered and designed with 3D Printing in mind. All others before have been made from plastic designed for injection molding and do not have the advanced characteristics for 3D Printing. It actually outperforms standard PLA and even ABS!
Not all manufacturers are created equal; As one of only 9 global filament suppliers officially recommended by the NatureWorks 3D printing suppliers guide, you can rest assured that this specific APLA 3D850 filament was produced by a world-class, high quality materials manufacturer.
3D-Fuel 3D printer filament is manufactured to demanding performance specifications and has proven filament precision! 3D printer filament from 3D-Fuel is of excellent dimensional tolerances. We don’t just say our filament is precise, we show that our filament is precise... Every spool has the diameter and ovality measurements listed right on the box!
This filament was produced from NatureWorks Ingeo™ PLA grade 3D850 resin which was specifically developed for 3D printing!
The 3D850 grade exhibits:
- Faster crystallization rates which allows for increased printing speeds
- Enhanced toughness
- Improved heat-resistance
- Annealable for even better heat resistance
- High resolution printing
- Good adhesion to build plates
- Reduced warping & curling
- Low odor
|NET WEIGHT: 1 KG (2.2 LB)|
|185°C - 215°C||
It is essential to ensure filaments are dry prior to printing. It is recommended to use high water content hair spray (as opposed to high ethyl alcohol content) or painter’s tape on the build plate to ensure the first layer of the print sticks to the plate. PEI (with a heated bed), BuildTak, and direct printing on acrylic can also produce good results.
For more stability and a higher quality print:
Annealing (Heat Treating) Info
To get the maximum strength out of your 3D printed part, we recommend a post- annealing procedure that could be done in your oven at a range of 176-266F (80- 130C) to promote increased crystallization and further improve the heat deflection temperature.
For best results:
Shrinkage and/or warping may occur. The degree of shrinkage/warping depends heavily on the part geometry.