Standard PLA - Ingeo 4043D - Snow White - 1.75mm
SKU: 10D1 3DFSPLA1WT
Filaments.ca has always striven to be in the forefront of 3D printing materials in order to bring our customers the latest and most innovative 3D printer consumables from around the world. As such, we are proud to announce that we have officially teamed up with 3DomFuel, the North American and European manufacturer of 3D-Fuel filaments, to bring you this low cost standard PLA made from genuine INGEO 4043D PLA resin.
Standard PLA is a hard plastic that produces a barely noticeable, but quite pleasant, sugary smell when extruding. Standard PLA has a quick transition from molten to solid, enabling it to provide more detail than other plastics.
Plant-Based, Not Oil-Based
Ingeo™ PLA is a 100% annually renewable, biodegradeable 3D printing material that is easier on the environment.
Ingeo™ PLA produces 75% less greenhouse gases and uses 50% less non-renewable energy (NREU) than traditional polymers like PET & polystyrene.
High Detail Parts
Ingeo™ PLA has a quick transition from molten to solid, enabling it to provide more detail than other plastics.
Low to No Odor
Ingeo™ PLA produces a barely noticeable, but quite pleasant, sugary smell when extruding.
Not all manufacturers are created equal; As one of only 9 global filament suppliers officially recommended by the NatureWorks 3D printing suppliers guide, you can rest assured that this specific INGEO 4043D filament was produced by a world-class, high quality materials manufacturer.
3D-Fuel 3D printer filament is manufactured to demanding performance specifications and has proven filament precision! 3D printer filament from 3D-Fuel is of excellent dimensional tolerances. We don’t just say our filament is precise, we show that our filament is precise... Every spool has the diameter and ovality measurements listed right on the box!
|NET WEIGHT: 1 KG (2.2 LB)|
|185°C - 215°C||
It is essential to ensure filaments are dry prior to printing. It is recommended to use high water content hair spray (as opposed to high ethyl alcohol content) or painter’s tape on the build plate to ensure the first layer of the print sticks to the plate. PEI (with a heated bed), BuildTak, and direct printing on acrylic can also produce good results.
For more stability and a higher quality print: