EconoFil™ Yasin PLA Filament - Print Settings
EconoFil™ PLA Printing Temperature: 190°C - 230°C
* Settings may vary depending on your printer, enclosure, cooling fans, etc. We recommend performing a test print first when using a roll for the first time.
- EconoFil PLA should be printed with a heated print bed set to 60°C - 80°C
- A good quality glue stick should be used for proper bed adhesion on most bed surfaces.
- If warping or stringing occurs, please lower your printing temperature. EconoFil PLA can printed as low as 185°C if needed.
- If excessive stringing occurs, the materials may need to be dried in a dehydrator.
- First layer nozzle temperature usually 5°C-10°C higher than subsequent layers.